It’s been a while, both on the wooden PC project and in general but I finally have a better design for the PC that can be fully laser cut on an Epilog 60W. It is made entirely from 1/4 bamboo plywood. This is what I have cut and glued so far.
And the motherboard tray is fully threaded with brass inserts.
This base here will mount the motherboard, the drives, and the Aquaero. On top of the right side will be a cover that hides the drives and wires and gives the project depth internally. I will be working on this project quite a bit over the next two weeks (hopefully finished by May 7th) to enter into the builds.gg contest that is about to start.